Esp32 Arduino | Reviews, Ranks and Prices

Latest Esp32 Arduino
JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
Latest Esp32 Arduino
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.
  • ESP32 OLED Dev Board - Support for arduino IDE; Full WIFI Protocol: WIFI 802.11 b/g/n/e/i; Support for 2.4 GHz; Supports Sniffer, Station, softAP and Wi-Fi Direct modes.
  • Good Circuit Design and Low Power Design - Sleep current ≤800uA, dual core processor, using traditional and low power BLE Bluetooth; Operational capacity up to 600DMIPS, receiver sensitivity up to - 98dBm, UDP continues throughput: 135Mbps. Space of pins is 2.54*23mm, fit to breadboard.
  • OLED Display Screen - On board 0.96 inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information.
DISCOUNTLatest Esp32 Arduino
SeeKool ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
DISCOUNTLatest Esp32 Arduino
SeeKool ESP32 Development Board for Arduino Nodemcu, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
DISCOUNTLatest Esp32 Arduino
SP-Cow ESP32S ESP32 Development Board 2.4GHz Dual-Mode WiFi+ Bluetooth Dual Cores Microcontroller Processor, Antenna Module with RF AMP Filter AP STA IDE Ultra Low Power(2pcs)
  • ESP32 is a safe, reliable, and scalable to a variety of applications. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution takes up the least amount of printed circuit board area.
  • Support 3 Modes: AP, STA, and AP+STA .The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
Latest Esp32 Arduino
diymore WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu
  • Main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / n HT40 Wi-Fi transceiver
  • Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip
  • Supports Sniffer, Station, softAP and Wi-Fi Direct modes
  • UDP continues to throughput by 135 Mbps
  • Operating voltage: 3.3V to 7V
Latest Esp32 Arduino
KeeYees ESP32-CAM Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB To TTL Serial Converter + 40 pin Jumper Wire
  • 【ESP32-CAM】ESP-32CAM can be used in various IoT applications. It is suitable for smart home appliances, industrial wireless control, wireless surveillance, wireless QR identification, wireless location system signals, etc. It is an ideal solution for IoT applications.
  • 【High Performance】Extremely small 802.11b / g / n Wi-Fi + BT / BLE SoC module; Dual-core 5V low-power 32-bit CPU processor; Frequency up to 240 MHz, computing up to 600 DMIPS; Built-in 520 KB SRAM, external 4M PSRAM.
  • 【FT232RL Module】The KeeYees FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
  • 【With Dupont Jumper Wires】 The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
  • 【Reliable Technical Support】 If you have any problems while using, please visit our website( www.keeyees.com ) to get tutorial or can contact us on Amazon, we will send PDF Document to you.
Latest Esp32 Arduino
KeeYees ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (2PCS)
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board
  • Pin number: 2 x 19PIN; Port: Micro USB.
  • Ultra-Low power consumption, works perfectly with the Arduino IDE
  • Support Lua program, easy to develop.
  • Support three modes: AP, STA and AP + STA.
Latest Esp32 Arduino
DHT11 Temperature Humidity Sensor Module(Pack of 2PCS), Compatible with Arduino Raspberry Pi Micro:bit Microbit ESP8266 ESP-12E ESP32
  • Feature: The product has excellent quality, fast response, anti-interference ability, high cost and other advantages
  • Compatible with: Arduino Raspberry Pi Micro:bit ESP8266 ESP-12E ESP32
  • With fixing screw holes, hole size: 2.6mm
  • What you will get: 2PCS DHT11 sensor and 2 sets Dupont cable
  • Warranty: Lifetime warranty, any question please contact freely
Latest Esp32 Arduino
IZOKEE ESP32 ESP-WROOM-32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller with CP2102 Chip for Arduino (3pcs)
  • This module is safe, reliable and scalable to a variety of applications.
  • The module has 38 pins and has more features than a 30-pin module. And smaller in size, more convenient to use.
  • Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
DISCOUNTBest
SeeKool ESP32 Development Board for Arduino Nodemcu, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
DISCOUNTBest
SeeKool ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
Best
JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold.
Best
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.
  • ESP32 OLED Dev Board - Support for arduino IDE; Full WIFI Protocol: WIFI 802.11 b/g/n/e/i; Support for 2.4 GHz; Supports Sniffer, Station, softAP and Wi-Fi Direct modes.
  • Good Circuit Design and Low Power Design - Sleep current ≤800uA, dual core processor, using traditional and low power BLE Bluetooth; Operational capacity up to 600DMIPS, receiver sensitivity up to - 98dBm, UDP continues throughput: 135Mbps. Space of pins is 2.54*23mm, fit to breadboard.

On this page you will find the list of the best Esp32 Arduino including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).


We have categorized the products in order to show the most popular and best sellers.

Best Esp32 Arduino

Here is the ranking of the best Esp32 Arduino, click to see reviews, details and active promotions:

Esp32 Arduino: buy at the lowest prices online.

Last update: 2020-04-06 affiliate link / images provided by Amazon Product Advertising.

Esp32 Arduino Cheap
JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
Esp32 Arduino Cheap
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Esp32 Arduino.

Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know.

Users who release reviews on Esp32 Arduino give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product.

The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs.

JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.
  • ESP32 OLED Dev Board - Support for arduino IDE; Full WIFI Protocol: WIFI 802.11 b/g/n/e/i; Support for 2.4 GHz; Supports Sniffer, Station, softAP and Wi-Fi Direct modes.
DISCOUNT
SeeKool ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

Latest Esp32 Arduino
JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values ​​exceed the threshold.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
Latest Esp32 Arduino
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.
  • ESP32 OLED Dev Board - Support for arduino IDE; Full WIFI Protocol: WIFI 802.11 b/g/n/e/i; Support for 2.4 GHz; Supports Sniffer, Station, softAP and Wi-Fi Direct modes.
  • Good Circuit Design and Low Power Design - Sleep current ≤800uA, dual core processor, using traditional and low power BLE Bluetooth; Operational capacity up to 600DMIPS, receiver sensitivity up to - 98dBm, UDP continues throughput: 135Mbps. Space of pins is 2.54*23mm, fit to breadboard.
  • OLED Display Screen - On board 0.96 inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information.
DISCOUNTLatest Esp32 Arduino
SeeKool ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
DISCOUNTLatest Esp32 Arduino
SeeKool ESP32 Development Board for Arduino Nodemcu, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
DISCOUNTLatest Esp32 Arduino
SP-Cow ESP32S ESP32 Development Board 2.4GHz Dual-Mode WiFi+ Bluetooth Dual Cores Microcontroller Processor, Antenna Module with RF AMP Filter AP STA IDE Ultra Low Power(2pcs)
  • ESP32 is a safe, reliable, and scalable to a variety of applications. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution takes up the least amount of printed circuit board area.
  • Support 3 Modes: AP, STA, and AP+STA .The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • The user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
Latest Esp32 Arduino
diymore WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu
  • Main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / n HT40 Wi-Fi transceiver
  • Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip
  • Supports Sniffer, Station, softAP and Wi-Fi Direct modes
  • UDP continues to throughput by 135 Mbps
  • Operating voltage: 3.3V to 7V
Latest Esp32 Arduino
KeeYees ESP32-CAM Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB To TTL Serial Converter + 40 pin Jumper Wire
  • 【ESP32-CAM】ESP-32CAM can be used in various IoT applications. It is suitable for smart home appliances, industrial wireless control, wireless surveillance, wireless QR identification, wireless location system signals, etc. It is an ideal solution for IoT applications.
  • 【High Performance】Extremely small 802.11b / g / n Wi-Fi + BT / BLE SoC module; Dual-core 5V low-power 32-bit CPU processor; Frequency up to 240 MHz, computing up to 600 DMIPS; Built-in 520 KB SRAM, external 4M PSRAM.
  • 【FT232RL Module】The KeeYees FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. You can use the modules in this kit to burn the program directly without additional purchase.
  • 【With Dupont Jumper Wires】 The Jumper wires are made of high-grade copper wire material for safe and durable to use. This set contains 20cm 40pin male to male Jumper Wires, with which you can easier to complete the project.
  • 【Reliable Technical Support】 If you have any problems while using, please visit our website( www.keeyees.com ) to get tutorial or can contact us on Amazon, we will send PDF Document to you.
Latest Esp32 Arduino
KeeYees ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (2PCS)
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board
  • Pin number: 2 x 19PIN; Port: Micro USB.
  • Ultra-Low power consumption, works perfectly with the Arduino IDE
  • Support Lua program, easy to develop.
  • Support three modes: AP, STA and AP + STA.
Latest Esp32 Arduino
DHT11 Temperature Humidity Sensor Module(Pack of 2PCS), Compatible with Arduino Raspberry Pi Micro:bit Microbit ESP8266 ESP-12E ESP32
  • Feature: The product has excellent quality, fast response, anti-interference ability, high cost and other advantages
  • Compatible with: Arduino Raspberry Pi Micro:bit ESP8266 ESP-12E ESP32
  • With fixing screw holes, hole size: 2.6mm
  • What you will get: 2PCS DHT11 sensor and 2 sets Dupont cable
  • Warranty: Lifetime warranty, any question please contact freely
Latest Esp32 Arduino
IZOKEE ESP32 ESP-WROOM-32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller with CP2102 Chip for Arduino (3pcs)
  • This module is safe, reliable and scalable to a variety of applications.
  • The module has 38 pins and has more features than a 30-pin module. And smaller in size, more convenient to use.
  • Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.

Promotions and Deals in the United Kingdom (UK)

During the year there are many promotions on products for sale online and Esp32 Arduino could be subject to big discounts.

Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Esp32 Arduino which are among the cheapest on the market. Just scroll through the list to find Esp32 Arduino the cheapest products.

Catalog

The product Esp32 Arduino can be found in the dedicated catalog where the entire list of products on sale is presented.

Esp32 Arduino is included in the 2019 catalog presentation along with the family of products belonging to the Brand.

Esp32 Arduino Cheap
JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
Esp32 Arduino Cheap
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.

Where to buy?

If you are asking yourself where to buy Esp32 Arduino? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Esp32 Arduino, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Esp32 Arduino and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Esp32 Arduino may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon.

The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases.

Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Esp32 Arduino used.

Discount Coupon in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount.

JZK ESP-32S ESP32 Development Board 2.4GHz WiFi + Bluetooth Dual Mode Antenna Module with Ultra Low Power
  • Data sheet: https://github.com/Nicholas3388/LuaNode. The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on.
  • The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
MakerHawk ESP32 Module OLED Display WiFi Development Board WIFI Kit 32 Low Power Consumption 240 MHZ Dual Core with CP2012 Chip 0.96inch Display for Arduino Nodemcu
  • ESP32 WIFI KIT 32 - Use Manual: https://drive.google.com/open?id=1adV8qKkzZWtWqKQMTOAmV44uLfnYM7xG; 2. It is not assembled and needs to be assembled manually. 3.Does not contain battery, you can purchase from: https://www.amazon.co.uk/dp/B07CYMYMS9.
  • Upgraded ESP32 Module - Upgrade 4 MB (32 MB) Flash to 8 MB (64 MB) Flash; better 2.4 GHz antenna design and impedance matching; add Vext power output pin, users can use this pin to drive external device.
  • ESP32 OLED Dev Board - Support for arduino IDE; Full WIFI Protocol: WIFI 802.11 b/g/n/e/i; Support for 2.4 GHz; Supports Sniffer, Station, softAP and Wi-Fi Direct modes.
DISCOUNT
SeeKool ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits.

By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider.

Rating: 3 of 5 - 1 votes
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 3.00 out of 5)
Loading...

Best Deals

Mpu6050 Arduino | Reviews, Ranks and Prices


Cnc Arduino Kit | Reviews, Ranks and Prices


Force Resistance Sensor Arduino | Reviews, Ranks and Prices